Garg Chemical Company



Water Resistant Silica Alumina Gel


Water Resistant Silica Alumina Gel

Water Resistant Silica Alumina Gel that we offer is used as a drying agent for air separations, compressed air & industrial gases. Our gel contains amprphous silica gel 83 % & aluminium silicate (Al2O3) 17%. Water Resistant Silica Alumina Gel, we offer, is used as a protective layer and as a drying agent for air separations, compressed air and industrial gases. We offer it in safe packaging.


More About Water Resistant Silica Alumina Gel :
This product is a water resistant silica alumina gel with fine pores. It is usually used as a protective layer of fine pored silica gel or fine pored silica alumina gel and also can be used solely when dissociated water is in high content. It is mainly used as drying agent for air separations, compressed air and industrial gases, as ethylene absorbent for preparation of liquid oxygen or liquid nitrogen and as liquid absorbent or catalyst carrier in oil, electricity & brewery industry, being specially used as a protective layer as stated above. Ideally 20% is good enough when used as a protective layer.

 

Details :

  • Chemical Formula : SiO2.nAl2O3.xH2O
  • Size : 3 – 5 mm
  • Packing : 25 Kg. Bags or as required


Specifications

Water Resistant Silica alumina Gel Readings
Adsorption capacity, % (25 oC, wt) RH=20%, = > 5.8
RH=40% = > 11.5
RH = 80%, = >33.00
Pore volume, ml/g Approx. 0.4
Specific surface area, m2/g 500
Bulk density, g/L Approx. 780
SiO2 Content % Approx. 83
AI2O3 content % Approx. 17
Moisture Content % =

≥ 3.0

Compression Strength, N % = 100